Question about Rugged Ridge CB mount

I have a full sized Cobra 29 LX on it and it works great. I had to drill some new holes in the mount to get it centered between the visors, but other that that no complaints. Can't say for sure with the freedom panels since I run a soft top, but it looks like it would be fine...
 
Stotch said:
I have a full sized Cobra 29 LX on it and it works great. I had to drill some new holes in the mount to get it centered between the visors, but other that that no complaints. Can't say for sure with the freedom panels since I run a soft top, but it looks like it would be fine...
Click to expand...

I have the same CB, and was worried with that mount it would hang too low and obstruct the rear view mirror. In the end I made my own.. Stupid easy, and has held up great.
 
I'm not a fan of the cable dangling in my view.

I mounted mine in front of that crappy blown out mesh sack in the center console.

IMG_20160514_134121992.jpg
 
It will work with the hard top freedom panels or a soft top. It works great for smaller CBs. With the larger CBs, it actually sits them on the mirror and doesn't allow you to adjust the mirror.

I love my RR CB mount. You can let the cable dangle or it has a loop to get it up out of the way! Makes your CB easy to hear too! I would definitely recommend.
 
i have the same mount with Cobra 29 the only downside is that you will see the reflection of the CB in the rear view mirror it does not affect the freedom panels.
i got used to it
 
Doesnt interfere at all just becareful of your placing where you drill, make sure the CB is slightly to the right so it sits center between visors. Mine initially was too far left and couldnt close my left visor so i had to re drill a hole.
 
me and a buddy installed ours at the same time. given that my cb is smaller than his mine clears everything, freedom panels and sunvisors.

his on the other hand, no matter which side he puts the cb "microphone" thingy it blocks the sun visors from coming up n down...

no complaints on my end though and havent heard him btich too much!
 
christov11 said:
me and a buddy installed ours at the same time. given that my cb is smaller than his mine clears everything, freedom panels and sunvisors.

his on the other hand, no matter which side he puts the cb "microphone" thingy it blocks the sun visors from coming up n down...

no complaints on my end though and havent heard him btich too much!
Click to expand...

I was able to get mine to fit between the visors (even with the mic) by drilling new holes in the CB mount. I'll try and get a pic after work.

JDalcour said:
Doesnt interfere at all just becareful of your placing where you drill, make sure the CB is slightly to the right so it sits center between visors. Mine initially was too far left and couldnt close my left visor so i had to re drill a hole.
Click to expand...

^^This

TrainWreck618 said:
I have the same CB, and was worried with that mount it would hang too low and obstruct the rear view mirror. In the end I made my own.. Stupid easy, and has held up great.
Click to expand...

It doesn't obstruct the view. I did bend the RR mount a bit to get it just right. Did you end up mounting it in the same location with DIY hardware?
 
Last edited:
Stotch said:
I was able to get mine to fit between the visors (even with the mic) by drilling new holes in the CB mount. I'll try and get a pic after work.



^^This



It doesn't obstruct the view. I did bend the RR mount a bit to get it just right. Did you end up mounting it in the same location with DIY hardware?
Click to expand...

Yeah, I mounted it in the same spot using a couple parts from the hardware store. It has worked really well
 
TrainWreck618 said:
Yeah, I mounted it in the same spot using a couple parts from the hardware store. It has worked really well
Click to expand...

Awesome! Pictures or it didn't happen ;)

Here's how I have mine up:
 

Attachments

  • 1473369359927.jpg
    1473369359927.jpg
    69.1 KB · Views: 148
  • 1473369373134.jpg
    1473369373134.jpg
    61.2 KB · Views: 150
  • 1473369388192.jpg
    1473369388192.jpg
    68.4 KB · Views: 150
...and from driver's perspective; no reflection/obstruction:
 

Attachments

  • 1473369611630.jpg
    1473369611630.jpg
    66.8 KB · Views: 144
Works great plenty of room and no cables dangling. Doesn't hit my rear view mirror. I'm using the Uniden Bearcat 880 CB.ImageUploadedByWAYALIFE1473371175.387896.jpg
 
Last edited:
RocknJK said:
Works great plenty of room and no cables dangling. Doesn't hit my rear view mirror. I'm using the Uniden Bearcat 880 CB.View attachment 221765
Click to expand...

Awesome, glad you posted a pic. I have the same CB and want to mount it above the mirror but wasn't sure if it was too large for that mount. In my old Jeep I had it over the dash cubby but couldn't hear the speaker very well. Looks like it mounts nicely above the mirror.
 
You must log in or register to reply here.
Top Bottom