Project JK DIY flat fender write up

[KernHydro]

I thought there was a write up on cutting factory fenders on project jk but cant find it. Can some one post a link on this :beer:

 

[LoPo]

Here you go:
http://project-jk.com/jeep-jk-write-ups/jeep-jk-wrangler-factory-fender-chop

 

[KernHydro]

thank you!:thumb:

 

[wayoflife]

LOL!! and here i was just about to post up a link :crazyeyes:

 

[Jeepin it]

Looks great think i will try this, if i was to run a 35 inch tire would i need a 1.5inch or 1.25 inch spacer? And will this add extra load on the front D 30 axle?

 

[Jeepin it]

Looks great think i will try this, if i was to run a 35 inch tire would i need a 1.5inch or 1.25 inch spacer? And will this add extra load on the front D 30 axle?

Jeep jk 2012.

 

[StrizzyChris]

Jeep jk 2012.

The tires will add resistance and therefore increase the torque you place on your axle shafts. Also the weight will place strain on your inner C knuckles. The spacers will add absolutely no strain to your axle.

Of all your voiced concerns, I think all you will need to do to run the mentioned set-up is weld gussets and call it a day.

 

[Jeepin it]

Great i have c gussets just waiting to weld them on. Just wish we could get away with tires sticking out past the guard here in aus looks like its new mud guards.

 

[wayoflife]

Looks great think i will try this, if i was to run a 35 inch tire would i need a 1.5inch or 1.25 inch spacer? And will this add extra load on the front D 30 axle?

i personally would go with the 1.5 spacers as the wheel studs can be just a bit too long and prevent a flush fit. it's really hard to see or know if things are off but, if they are, this could lead to a spacer failure. the 1.5's will clear for sure. also, running high quality spacers are no different than running a set of aftermarket wheels with less backspacing.

 

[Jeepin it]

So if i was to run wheels with 4.5 backspacing i would not need the spacers? That was the plan to buy tires and rims.


Thanks

 

[jdenney741]

Exactly what door edge molding is this? I was at lowes and couldn't find anything that looked like the picture.

 

[olram30]

Exactly what door edge molding is this? I was at lowes and couldn't find anything that looked like the picture.

I've seen it at Wal-Mart, auto zone and other auto parts stores.

 

[jdenney741]

I went lowes. The stuff I found was not c shaped to fit around the fender. Or was metal, etc.

 

[olram30]

I went lowes. The stuff I found was not c shaped to fit around the fender. Or was metal, etc.

Yeah, Lowe's and home depot are home improvement centers. Try auto zone or similar stores

 

[jdenney741]

I just figured door edge molding for houses. But maybe it means for cars.

 

[HILLZ]

Great i have c gussets just waiting to weld them on. Just wish we could get away with tires sticking out past the guard here in aus looks like its new mud guards.

Hey Bud, where abouts in Aus are you? I'm in Perth.
mine stick out past the guards a bit and I've not had any drama from the local constabulary yet :cheesy:

not the best shot for how far they stick out but it is very noticeable in person.

 

[Tdkrawler]

Hey Bud, where abouts in Aus are you? I'm in Perth.
mine stick out past the guards a bit and I've not had any drama from the local constabulary yet :cheesy:
View attachment 102412
not the best shot for how far they stick out but it is very noticeable in person.

Are they trimmed stock guards?

Sydney sider myself

 

[HILLZ]

Are they trimmed stock guards?

Sydney sider myself

Yeah they are.


Sent from my iPad using WAYALIFE mobile app

 

[sjd78]

Anyone have pictures of an unlimited with chopped fenders and no lift on 35's? Do you get a lot of rubbing?

 

[olram30]

Anyone have pictures of an unlimited with chopped fenders and no lift on 35's? Do you get a lot of rubbing?

Might rub, might have to trim a little bit of metal to make it work.