Oscar's No Build Thread

Jsouder53 said:
Very cool process! Glad it’s all level!
Click to expand...

JKbrick said:
Very nice those look great
Click to expand...

WJCO said:
Nice work. :thumb:
Click to expand...

Thanks! I have noticed a difference (for the better) in the handling/body roll since installing.

Jsouder53 said:
Awesome flex for a homemade(professional quality) kit!!! [emoji106]
Click to expand...

Thanks! I’m really happy with the results and was surprised to get that tall without lifting a tire. I’m getting excited to head up north and test everything out!
 
Here’s my newly designed front disco:

IMG_6826.jpg

Just cut the excessively log bolt down so it doesn’t stick past the nut. Done!
 
Working on replacing these little POS’s today:

IMG_6848.jpg

IMG_6846.jpg

IMG_6847.jpg

IMG_6843.jpg

What a difference! I can actually lift the doors off without dropping my nuts to the floor! [emoji41]
 
TOPLESS said:
Good work on all your projects! I want to replace my liners this summer.
Click to expand...

The hardest part was getting the old liners out. Make sure you have a removal tool or a chunk of 1/2” outside diameter pipe or rod will work.
 
Last edited:
Not much this weekend, just a wash and some new stickers:

IMG_6904.jpg

Not real impressed with my nickel platter:

IMG_6905.jpg

And treated myself to a new creeper since my fat ass broke my 30 year old Craftsman last weekend. I got this on sale at Meijer for $25 plus saved another $5 on my automotive purchase:

IMG_6906.jpg
 
I did some more measuring and settled on the design of my side step/slider:

IMG_6938.jpg

The support tubes will be 2” x 2” while the step it’s self will be 1 3/4” x 1 3/4”. Looks like I’ll be brushing up on my welding skills [emoji15]. I’m still undecided whether to bolt them to the frame or weld. I guess we’ll see how the welding goes and decide later.
 
Found some shop time and started work on my side step/sliders. Cut the 6 standoffs from 2”x2” square tube at the cold saw:

IMG_7005.jpg

IMG_7006.jpg

After some careful layout, the corners were drilled and cuts made at the bandsaw. An air file was used to clean up the cuts and deburr the edges.

IMG_7007.jpg

IMG_7008.jpg

IMG_7009.jpg

Some test fitting of the concept:

IMG_7019.jpg

IMG_7017.jpg

I’m pretty happy with the fit and look thus far.
 
sipafz said:
Found some shop time and started work on my side step/sliders. Cut the 6 standoffs from 2”x2” square tube at the cold saw:

View attachment 301341

View attachment 301342

After some careful layout, the corners were drilled and cuts made at the bandsaw. An air file was used to clean up the cuts and deburr the edges.

View attachment 301343

View attachment 301344

View attachment 301345

Some test fitting of the concept:

View attachment 301346

View attachment 301347

I’m pretty happy with the fit and look thus far.
Click to expand...

Very cool, nice design. I like it


Sent from my iPad using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom