What was done to your rig this week?

Clutch

Caught the Bug
Does anyone know anybody in Missouri that I could trust regearing my jk?The closest shop I trust that I know of is Trail Jeeps or Northridge4x4 in Coloroado.

Have you talked to Axleboy in St.Peters? I'm sure they would do a good job.
 

coop9779

New member
ImageUploadedByWAYALIFE1457234046.800719.jpg

Poison spyder trail cage going in.
37 mickey Thompson MTZ p3's
1350 JE REEL driveshafts
RCV front axles
Waiting for the brown clown to drop off my genright tank and Currie antirock rear swaybar

ImageUploadedByWAYALIFE1457236408.940315.jpg
 
Last edited:

WarriorJeep

New member
This week installed lift kit, and my favorite some wheels from Raceline. Still have to wait for my PR44 and ProGrip brake kit to arrive and install (thanks Trail Jeeps for fitting me in) and its off to EJS to see what I can break. Because as we all know something will inevitably break.

On the lift at High Country Performance 4x4
IMG_20160303_082353.jpg

Scott arguing with my grabbers
20160304_124306.jpg

Raceline sexiness
20160304_113134.jpg
 

kentuckianajk

New member
About to start my passenger side eco door skin. You should be able to see where my smutty built rails dented the. Body.
 

Attachments

  • 1457253675175.jpg
    1457253675175.jpg
    34.5 KB · Views: 294
  • 1457253694607.jpg
    1457253694607.jpg
    34.4 KB · Views: 296

LasVegasJK

New member
With the help of NV375, I installed EVO rocker and corner armor, EVO plate relocation, Poison Spyder led plate light/3rd brake light with Maxxima led stop/tail/turn/reverse lights. ImageUploadedByWAYALIFE1457307493.171074.jpg ImageUploadedByWAYALIFE1457307512.452953.jpg ImageUploadedByWAYALIFE1457307531.887854.jpg
 

swampdog

New member
4.88 gearing going in front and rear, ARB 35 spline going in the rear with 35 spline chromo's for the rear. EVO gussets also going in on front C's. More pics to follow. ImageUploadedByWAYALIFE1457397210.649333.jpg ImageUploadedByWAYALIFE1457397220.915815.jpg
 

jeeeep

Hooked
new tie rod, flip drag link, removed aluminum track bar bracket and installed weld on steel bracket recommended for the PR44 by Dynatrac - a lot better steering from the PSC now.

replaced leaky transmission cooler lines, the original leaked because Chrysler used a 3/8" hose on a 5/16" tube with no barbs to hold the hose and avoid leaks...luckily I found some 11/32 hose to make do until the new line arrived. New cooling line appears to have a flare on the end for the clamp the keep the hose on and avoid leaks, time will tell..i'm keeping the repaired line just in case...

installed rear seat incline blocks, it's more comfortable seating now, I was pleasantly surprised :thumb:

installed quadratec led fog lights, they match great to the visionX headlights

painted the flares back to black using Eastwood plastic resurfacer

gave the Jeep a wax after 4 years

ordered phone replacement...got in a hurry to test drive and forgot I had my phone on top of the tire, ran over it so no pics at this time :doh:
 

kentuckianajk

New member
Got my rock skinz on. Now I need to find a person or good company that can show me how to weld my sliders

On. Or do it at a fair. price [ 1457416368212.jpg 1457416368212.jpg ATTACH]191880[/ATTACH]prlice
 
Top Bottom