Search results

  1. S

    Sway bar end link in contact with the spring?

    Gents - thanks for all the information. Over the weekend I pulled the springs to see if there wasn't something glaring right at me. I had10mm spacers that we're sent to me after the fact and never put them in so I took this as a good opportunity to do so and what a great excuse to do just...
  2. S

    Sway bar end link in contact with the spring?

    I should add - 2" Old Man Emu lift Bingo. Closer look there is a slight bow to the spring bulging towards the front of the vehicle. Springs have maybe 10,000 miles on them. I guess we'll ping the manufacture to see if there is a warranty possibility.
  3. S

    Sway bar end link in contact with the spring?

    Nope. OE control arms.
  4. S

    Sway bar end link in contact with the spring?

    Just noticed this on my rig and wondering what it may be? What would you techies be looking for to see what's off? Can't see it clearly in the photo but it there is about a 1/32" clearance between the link and spring but some scuffing on the spring from rubbing. Bad sway bar bushings? Spring...
  5. S

    On the service side, they are pretty fantastic in my experience. I have the M/T III wheels and...

    On the service side, they are pretty fantastic in my experience. I have the M/T III wheels and one kept losing air over time. Had my tires looked at 20 different ways and turns out the wheel was a leaker. M/T replaced it quickly and without too many questions. I'm sure there may have been a...
  6. S

    Door node removal

    Before I break it, I should ask. How do these little buggers come out? I'm pulling but it's not releasing. The tan 25 amp fuses. Sent from my iPhone using WAYALIFE mobile app
  7. S

    show your sunrise/sunset pictures

    Sunset view..
  8. S

    Show your 2 doors on 35's stating lift you are running.

    2" OME HD springs, Nitto TG's on Mickey Thompson classic 3 in black. Sent from my iPhone using WAYALIFE mobile app
  9. S

    LED Fog bulbs installed..

    Purchased the Alla Lighting LED bulbs and wanted to show the difference between stock and the LED's. Nice difference and cool matching white to that of the Trucklite headlights; almost too bright. These are the 80W offering.
  10. S

    Led fogs

    Kind of surprised that I'm not seeing more discussion on LED Fogs (maybe I'm not searching right)? What are you guys throwing in there for replacements? I upgraded to Trucklite LED's a few years ago and want to now replace the fogs with LED's. Don't want to spend $300.00 on fogs and see a lot...
  11. S

    Fender Flares -- do you have to cut or swap out with AFM after adding larger tires?

    Question as to when do you really have to change or cut your fenders one you have lifted your Jeep. I've got a 2010 that I installed the HD Old Man Emu springs and shocks - this yielded about a 2-2.5" lift. Tire wise, I added 35" Nitto Trail Grapplers. Front currently measures (fender flare...
  12. S

    Engine bay cleaning

    What do you guys do for cleaning the engine bay and what do you feel is the proper way to do so? Was going to go down to the coin operated car wash that offers degreasing and give her a quick makeover. Figure covering the intake, being easy around the battery, alternator and fuse box and...
  13. S

    Driver side door will not lock/open with keyless remote

    Doing a little homework it appears that my drivers side door actuator is shot. Has anyone removed and replaced this and done a write-up on it? I disassembled the outer cosmetic panel but behind it is another panel (that has the window regulator attached to it) with about 10 hex bolts holding...
  14. S

    WIN a NEW Painless Trail Rocker JK Jeep Accessory Control System!!

    This will wake some folks up after looking through 13 pages! Saw this red beauty with on 40,000 miles on in on ebay a month ago.
  15. S

    OE Fender Cleaning

    UPDATE - Here is the result. For comparison, take a look at the hood latches.
  16. S

    OE Fender Cleaning

    Washed and detailed the Jeep yesterday and used a small amount of Pledge on the OEM plastic fenders and the transformation was pretty spectacular. Was too lazy to go pick up a bottle of Back to Black and figured I'd give it a try -- results were excellent. Just thought I share the experience.
  17. S

    Electronic Stability Control (ESC) activating after spring installation?

    I guess there is an adaption period. Right after I installed there springs, the system went a little haywire. Seems to be good to go now. When I did the install thinking back on it, I dropped the rear axle and it somewhat tugged the electrical wiring in the wiring harness. I assume the wire...
  18. S

    Electronic Stability Control (ESC) activating after spring installation?

    Changed my rear springs this morning and after driving the Jeep around, have the ESC light on the dash come on (you can also hear/feel the ESC system kicking in and rapid pulse braking) when exiting the freeway or turning on transition ramps. This has happened minimally with the old set up but...
  19. S

    Flashpaq for 6-spd manual 3.8's -- if you have it, did it make much of a difference..

    and would you purchase it again knowing what you know? I'm mulling the upgrade from the Flashcal and curious to hear some opinions..:pop2:
  20. S

    Truck Lite - Low Beam Control Circuit High

    Checked codes with my new Flashcal and (2) showed up as low beam control circuit voltage high for both right and left sides. I have the Trucklite LED's and pigtail harnesses. Anyone else pulling this code and is there a potential issue with this that anyone can see or am I good to go...
Top Bottom