Search results

Anyone try installing a bc-30 off the front bumper for high angle approach view? If you're not familiar with the bc-30, it's an accessory back up camera for the Garmin gps. We already have a great mod for back up camera for the stock head unit. I thought this bc-30 would be great to see over the...

Hey Guys, I've always run the motor while winching or using the air compressor. Alternator is good and I've never drained it by leaving something on. What I didn't do was put it on a charger to keep it at full charge, which is what the Oddyssey manual recommends. What do you guys think about...

Hey Guys, I just bought the Astro 1442 nutsert tool that Eddie has linked to Amazon. My upcoming rock skin mod didn't come with nutserts. Should I get stainless steel or just go with the zink plated one Astro sells? Thanks. HAPPYTRAILS

Hey Guys, I've been running my front drive shaft for about a year now. I service the zerts every 3k miles. I noticed the slip spline has vertical movement when I push up on it, tranny in park tcase in 2hi. Normal or does it need to be rebuilt? Thanks. HAPPYTRAILS

Hey Guys, can anybody tell me which direction to loosen the jam nuts? I need to make a toe adjustment on my 7075 aluminum TR. I think passenger is CCW and driver is CW, or rotate the BFW up looking at it from the front. Thanks for the help!

These are the Shocks that came with the Rancho 2" sport lift. I went with a longer one. $100.00 + shipping for the pair. Last time I checked, about $50.00 from AZ to the East coast.

New Alloy USA ball joints $120.00! SHIPPED! SOLD! Thanks DMF!

Talked to Eric at Dynatrac this morning. Answered all my questions, gave me a discount for being a WAL member and had a FedEx tracking number within an hour for my ProSteers! Great doing business with them!

Thanks Eddie and Cindy! We hope to tag along on a run some day. Until then, we enjoy your videos and pics from the trail! Thanks for the fast shipping too!

Hey Guys, I have an unused 9000XL that I'm thinking about using for my stabilizer. What if I fab up some brackets to mount it at it's mid travel point and set the dampener to 1. Any reason why this won't work? The shock is a front 99326 with 7.8" of travel. I would mount the bottom or ring end...

Hey Guys, It's time to replace the ball joints on my 2015 with 53k miles. I've been running 33s with 1-1/2" spacers and the balls are shot. I will be moving up to 35s soon so EVO C Gussets will go in while I have it apart. Opinion Please! Should I go all the way with unit bearings, shafts and...

I changed my t-stat while doing oil cooler swap. I bought MOPAR 5184651AH from Amazon. Install went fine, burped and topped off until level was good! About 200 miles on it and she left me on the side of the freeway. After cool down, added coolant and restarted. Tstat did not open so I shut it...

I'd like to fix this leak! The flat oily sensor aft of the spark unit. Can someone tell me what it is and if I can pull that one screw, clean it up and reinstall? Thanks.

Hey Guys, I'm getting ready to change out my cooler for a P06DE code. I plan to replace spark plugs and t-stat while I'm in there. The 2015 JKUR has 52k on it and I noticed almost all the engine plastic wire loom has disintergrated? So any advice on other items I should check or change during...

I'm taking a group from work that haven't run this trail yet! We have one built Toyota Land Cruiser, one Surplus Hummer, one 86' WJ and a Samurai! I'm the ONLY one with a JK, we are a diverse bunch. It should be a Hoot! Any WAL members that would like to meet up are more than welcome, I could...

A year ago my blend door died, no movement at all. After a little research, I ordered a Doorman unit off Amazon and installed it. Then I was getting a blinking defrost light with the blend door moving around. The controller would only move it to full hot or full cold. Tried battery disconnect...

Hi Guys, I have some wobble happening when I hit a bump at about 45mph. The drag link end at the knuckle pops up and down when doing the back and forth steering test. I am replacing the drag link end with a Crown OEM unit. As you can see there is an insert in the stock knuckle, is this original...

Hey Guys, I thought I would run this past the group before drilling into my hard top! My plan is to get a 60" x 54" Rhino rack for camping gear, Home Depot runs, NO roof top tents. My question is, what if I make my own mounts using hard rubber pucks on the raised ribs bolted through long metal...

I have read every post I could find on this issue. 2015 JKUR, manual temp control. The problem began with my blend door actuator stopped working (no movement while adjusting the control knob) I replaced the bda with an aftermarket unit from Doorman. The defrost light would blink for about 30...

Hi Guys, My wife and I will be rolling into town Friday the 4th. I'm sure all of you that have been, remember the excitement of your first trip! We plan on running as many trails as we can until the next Friday the 11th. My list is Fins, Hells Revenge, Poison Spyder, 7 mile, Top of the World and...