Recent content by SWRUBI

Gents - thanks for all the information. Over the weekend I pulled the springs to see if there wasn't something glaring right at me. I had10mm spacers that we're sent to me after the fact and never put them in so I took this as a good opportunity to do so and what a great excuse to do just...

I should add - 2" Old Man Emu lift Bingo. Closer look there is a slight bow to the spring bulging towards the front of the vehicle. Springs have maybe 10,000 miles on them. I guess we'll ping the manufacture to see if there is a warranty possibility.

Nope. OE control arms.

Just noticed this on my rig and wondering what it may be? What would you techies be looking for to see what's off? Can't see it clearly in the photo but it there is about a 1/32" clearance between the link and spring but some scuffing on the spring from rubbing. Bad sway bar bushings? Spring...

On the service side, they are pretty fantastic in my experience. I have the M/T III wheels and one kept losing air over time. Had my tires looked at 20 different ways and turns out the wheel was a leaker. M/T replaced it quickly and without too many questions. I'm sure there may have been a...

Before I break it, I should ask. How do these little buggers come out? I'm pulling but it's not releasing. The tan 25 amp fuses. Sent from my iPhone using WAYALIFE mobile app

Sunset view..

2" OME HD springs, Nitto TG's on Mickey Thompson classic 3 in black. Sent from my iPhone using WAYALIFE mobile app

Purchased the Alla Lighting LED bulbs and wanted to show the difference between stock and the LED's. Nice difference and cool matching white to that of the Trucklite headlights; almost too bright. These are the 80W offering.

Kind of surprised that I'm not seeing more discussion on LED Fogs (maybe I'm not searching right)? What are you guys throwing in there for replacements? I upgraded to Trucklite LED's a few years ago and want to now replace the fogs with LED's. Don't want to spend $300.00 on fogs and see a lot...

Question as to when do you really have to change or cut your fenders one you have lifted your Jeep. I've got a 2010 that I installed the HD Old Man Emu springs and shocks - this yielded about a 2-2.5" lift. Tire wise, I added 35" Nitto Trail Grapplers. Front currently measures (fender flare...

What do you guys do for cleaning the engine bay and what do you feel is the proper way to do so? Was going to go down to the coin operated car wash that offers degreasing and give her a quick makeover. Figure covering the intake, being easy around the battery, alternator and fuse box and...

Doing a little homework it appears that my drivers side door actuator is shot. Has anyone removed and replaced this and done a write-up on it? I disassembled the outer cosmetic panel but behind it is another panel (that has the window regulator attached to it) with about 10 hex bolts holding...

This will wake some folks up after looking through 13 pages! Saw this red beauty with on 40,000 miles on in on ebay a month ago.

UPDATE - Here is the result. For comparison, take a look at the hood latches.